Novacam metrology videos
The videos below present just a few of the many applications of our technology. We encourage you to also visit our Youtube channel to view these and additional videos.
Cylinder measurement
Duration: 01:21
See how NOVACAMTM BOREINSPECTTM system measures a cylinder bore in a non-contact automated manner, providing micron-precision 3D measurements of the interior. Configuration with 18 mm diameter rotational probe is ideal for 5 to 15 cm (2″ to 6″) diameter bores such as engine cylinders, actuator cylinders, etc.
Chatter measurement
Duration: 02:15
See a non-contact chatter gauge built by an integrator using NOVACAM RS2 rotational scanner, NOVACAM Chatter Analysis Software, and a robotic arm. This temporary automated gauge was used to measure the chatter in 16,000 turbo shafts over 4 weeks while the client was troubleshooting a faulty manufacture line.
Flatness measurement
Duration: 02:00
Learn how, inspecting with a galvo (raster) scanner, the NOVACAMTM SURFACEINSPECTTM system acquires a mating surface of a valve body and calculates its flatness parameters.
Edge radius measurement
Duration: 01:53
See how NOVACAMTM OPTICAL 3D PROFILOMETERTM system, equipped with with a non-contact fiber-based optical galvo scanner, characterizes tool edges in 3D and with micron-precision.
Airfoil measurement
Duration: 01:43
Watch how MICROCAMTM-3D airfoil scanner, NOVACAM non-contact CMMTM system delivers micron-precision 3D optical measurements of hard-to-reach places.
Turbine blade inspection
Duration: 01:51
See how NOVACAM RS2 rotational scanner acquires turbine blades with its spinning non-contact optical probe. The RS advances the spinning probe into the complex geometrical structures of turbine blades to acquire their dimensional geometry down to the micron.
Valve-body bore ID measurement
Duration: 02:02
Watch a demonstration of a fully-automated digital inspection of valve body bores, where NOVACAMTM BOREINSPECTTM system uses a non-contact rotational scanner, spins and advances a small-diameter optical probe to measure the inside diameters (IDs) of these bores – down to the micron.
3D Tube ID measurement
Duration: 01:51
Learn how MICROCAM-3D tube ID scanner (NOVACAMTM TUBEINSPECTTM non-contact 3D metrology system) provides micron-precision 3D characterization of tube interiors.
Related links
Contact us – we’ll be happy to discuss your metrology needs.
Request free sample analysis to see if our 3D metrology systems are suitable for your application.
Thanks to https://neurobox.ca/ for creating many of our videos